Material Works v1.1d2 by Blender Bros

Blender 材質已過時，永遠告別您的舊材質工作流程。

輕松材質 - 一鍵搞定

告別接縫！

完全自定義 - 無需節點！

完全優化的貼圖

電腦運行緩慢？內存不足？電腦運行良好？內存充足？

沒問題 - 我們已為您優化了所有內容，提供 2k 和 4k 貼圖。

如果您的機器性能強大，并且不關心內存或性能，請選擇 4k。

如果您的機器速度較慢且內存較少，請選擇 2k。

使用 2k 貼圖可以獲得相同的結果。由于我們所有的紋理都是可平鋪的，因此只需放大 2k 貼圖，它看起來就會與 4k 貼圖相同 - 無需使用任何額外內存或降低性能。

透明度控制

我們的一些紋理具有完全透明的遮罩能力。

無論您是想在模型中留出一些透明孔，還是想將它們關閉，只需調整透明度滑塊即可完全控制。

發射控制

只需單擊按鈕即可通過完全發射控制為您的材料增添色彩。

完全斜角控制

無論您的幾何形狀多么緊密，您都可以始終使用斜角而不會產生令人討厭的重疊。

只需勾選“斜角”復選框，程序斜角就會添加到您的模型中。

Blender Materials are DEAD

Say goodbye to your old material workflow. Forever.

Effortless Materials – All In One Click

Goodbye, Seams!

Complete Customization – No Nodes Required!

Fully Optimized Maps

Slow PC? Low on memory? Good PC? High on memory?

No problem – we’ve optimized everything for you with 2k and 4k maps.

If you have a powerful machine and don’t care about memory or performance, choose 4k.

If you have a slower machine and less memory, choose 2k.

You can get identical results using 2k maps. Since all of our textures are tileable, simply scale up the 2k map and it’ll look the same as the 4k map – without using any extra memory or bogging down performance.

Transparency Control

Some of our textures have fully transparent masking abilities.

Whether you want some see-through holes in your model, or perhaps want them closed off, simply adjust the transparency slider for full control.

Emission Control

Spice up your materials with full emission control at the click of a button.

Complete Bevel Control

No matter how tight your geometry is, you can always use bevels without nasty overlaps.

Just tick on the ‘Bevel’ checkbox and a procedural bevel will be added to your model.